Ghost Immobiliser Fitting
Guard your vehicle against key theft, cloning and hacking using the first aftermarket CAN-Immobiliser. The Ghost app and GPS tracking can be linked to the immobiliser to send you alerts when your vehicle is stolen or tampered with.
Installing ghost 2 immobiliser review is relatively straightforward for a skilled technician. Having the right tools, insulation tape and heat shrink tubing is essential.
Getting Started
Ghost immobilisers can be a great alternative to physical theft protection devices such as wheel locks and car alarms. They protect your vehicle without the use of LED indicators or key fobs. Instead they connect directly to the ECU's CAN data network. They can only be started by entering a PIN sequence. This gives a more secure level of security against key hacking, cloning and even ECU swapping.
Installing a ghost immobiliser Birmingham requires a high degree of agility and accuracy. It's like walking through a minefield. A single mistake could cause serious damage to your vehicle's electrical circuits. It is essential to comprehend the installation procedure and prepare your vehicle properly.
First, you must prepare the vehicle by removing the interior panels to make space for the immobiliser unit. Once you've found the perfect location to conceal it, use cable ties to secure it. Clean up your wiring by tying loose wires down and using insulation tape to cover any exposed connections. This reduces the chance of an accidental short circuit and improve the appearance and reducing the chance of theft.
Identify a constant source of 12V power and an earthing point for the ghost immobiliser. Once you've located them test the power cables with a multimeter. Connect the CAN H & the CAN L wires from the immobiliser with the grounding and power points.
It's important that you ensure that all connections are checked and check the immobiliser for signs of corrosion. Also, test the system to make sure it's functioning properly by entering a pin code and starting the engine. This should become a part of your daily routine, as it will allow you to identify any intermittent problems early. Regular testing will help prolong the life of your device and ensure it is running at its peak.
Preparing the Vehicle
Installing a Ghost immobiliser requires skills and knowledge. A wiring diagram of the vehicle is vital to identify the proper wires and making precise connections, while a multimeter can help verify electrical values and ensure security. Cable ties and insulation tape can be used to shield the connections from tampering and keep them secured. Finally, a user guide will provide specific directions specifically tailored to your Ghost Immobiliser model.
Once installed, a ghost immobiliser can prevent unauthorised engine start by requiring the owner to input a unique PIN code sequence through existing buttons in the steering wheel or centre console. The code can be changed at any time by the owner by hand or remotely via a mobile app. The device is also quiet and unnoticeable by thieves as it does not emit any radio frequencies.
Ghost immobilisers are directly connected to the CAN bus of the vehicle, a network which communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals sent by the ECUs and blocks the engine from running if a false signal is detected. The system is tamper-proof as well as weatherproof, but it does not have key fobs or LED indicators to draw the attention of thieves.
It can be positioned behind or in a less visible area so that it's not easily spotted by thieves and won't hinder vehicle performance. It can be tucked away in a small container, so it is less likely to be noticed by untrustworthy salespeople during a test drive.
Its stealthy operation and integration with the vehicle's CAN bus network make it a formidable deterrent to modern methods of theft, including key cloning and signal relay attacks. The system can be paired with other security measures to create an effective barrier that will frustrate even the most persistent thieves. This is the reason why more insurance companies are recommending or even requiring ghost immobilisers be installed, as they can drastically reduce the cost of insurance.
Making Connections
Contrary to traditional security systems which can be heard by thieves, ghost immobilisers work silently to prevent them from knowing when your vehicle is turned on. They also prevent high-tech methods of stealing vehicles, like OBD hacking. They can also be installed without leaving permanent marks on your vehicle making them a good option for those planning to sell their car in the near future.
The Autowatch Ghost 2 CANbus immobiliser is among the newest and most reliable solutions to prevent car theft. It disables your engine using the CAN data network and generates a unique PIN code, which is difficult for criminals to guess. It can be used on various vehicles, and it works with a variety of features already installed including car alarms, steering wheel locks, GPS trackers, and door lock bypass.
If you decide to go with a Ghost immobiliser, be sure to refer to the wiring diagram for your specific car model to identify the wires to connect. Double-check their locations to make sure they are correct, and then label them or tape them to help keep track of them. You will also have to locate a constant power source (12V) for the system, as well as a grounding. Once you have all the components, you can begin connecting them to complete the installation.
If the ghost immobiliser is connected to your CAN bus, it will block your vehicle from starting until you enter a pin number using the buttons on the steering wheel or dashboard. This will stop ECU cloning as well as other methods of theft of vehicles. It can also be used with other Thatcham approved security equipment like alarms or tyre clips to provide your vehicle with an even greater security level.
As the UK automotive aftermarket market grows and expand, so do the options for securing your vehicle. With so many avenues for thieves to gain access and take your car it's essential to take every precaution to ensure it isn't taken away. Ghost immobilisers have become a popular choice among car owners who are accountable.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU through an CAN network. This stops the engine from starting until the PIN code is entered. This makes it extremely difficult for thieves to copy your key fob and start your car, and more difficult to disable the system through hacking into its electronic components.
Ghost Immobilisers can also be used in conjunction with GPS tracking devices to help locate your vehicle in the event that it is stolen. This feature is not a common option for security products sold by the aftermarket, but it's a great way to enhance your security and get peace of mind knowing that your vehicle is always protected.
In addition to offering enhanced security in addition to providing enhanced security, in addition to providing enhanced security, the Ghost-II immobiliser also provides a comfortable user experience, removing the need for additional key fobs and devices. It features a simple, intuitive PIN code entry system that works seamlessly with your everyday routine. Additionally, it provides options for deactivation and features that allow you to temporarily disable the immobiliser for valet parking or servicing.
Get the tools you require and familiarise yourself first with the wiring of your vehicle. A basic set will allow you to make precise connections. A multimeter is a tool to test electrical values. Insulation tape and heat shrink tubing are also essential for protecting connections from short circuits, while cable ties can be used to keep the wiring in the correct position. It's also important to work in an area that is well-lit and wear safety gear when using electrical equipment and components.
After you've completed the installation, you should test the Ghost immobiliser to make sure that it's functioning properly. The first step is to start the vehicle without entering the PIN code. If this fails, you'll need to test the system again and conduct a thorough inspection of the connections.
Unlike other security systems unlike other security systems, the Ghost Immobiliser is a covert device that is not spotted by thieves and is more effective than conventional physical deterrents such as wheel clamps or steering locks. It is TASSA approved and recognised by some insurance companies, making it an investment that's cost-effective and will give you the peace of mind you need.