Ghost Car Immobiliser
Ghost is an anti-theft system of the modern generation that blocks your vehicle from starting if you do not connect the sequence pin. It is undetectable, and operates by using CAN data networks.
It can be programmed to a unique pin code which is input via buttons that are already on the steering wheel or centre console, or on door panels. This makes it extremely efficient against modern methods of theft, such as key replication and relay vehicle hacking.
Easy to install
The Ghost immobiliser is a cutting-edge security tool protects your vehicle from key cloning and hacking. It can also prevent key theft. It is discrete, invisible to thieves, and TASSA certified (a third party group of police and security experts). This makes it one of most secure devices available.
The ghost system is connected to the CAN bus of your vehicle. It is the network that houses electronic control units (ECUs) that control the transmission, engine and brakes. It also stops the vehicle from starting unless the unique PIN code sequence is entered. The PIN code can be programmed into the device using buttons on the steering wheel, the centre console or door panels. The sequence can last up to 20 presses. This makes it impossible for thieves to guess the right code.
Unfortunately, a number of determined criminals are finding ways to get around these advanced security systems. One method is to jam or spoofing signals between the ECU and the Ghost Immobiliser. The other way is to connect to the CAN-bus and send malicious commands to the ECU of the vehicle. These commands can cause the vehicle to stop or render the vehicle unusable. Installing additional security measures, such as alarms and a GPS tracker can help keep your car secure.
A ghost immobiliser is an ideal addition to your other security measures. It can be installed easily and quickly without the need for extra equipment or visible components that could warn potential thieves of its presence. The device can be concealed beneath your dashboard or steering wheels which makes it difficult for thieves. It is silent and cannot be detected using radio frequencies.
However, you must install your ghost immobiliser by using an Thatcham or Autowatch approved installer. They are experts who know their cars inside out. They'll be able find the ideal hiding spot for the device and make sure that it's safe from view. It is recommended to make use of a tracker approved by Thatcham as well as a dash camera along with your ghost immobiliser to ensure the best security.
There are no keyfobs, LEDs or other indicators to assist you in finding it.
With the advancement of vehicle thieves, it is becoming more difficult to keep your valuable possessions safe. Thankfully, the manufacturers of Ghost Immobiliser have stayed one step ahead, developing technology that is completely inaccessible to thieves. This advanced anti-theft device is specifically designed to safeguard your car from key cloning, hacking, and even theft. It communicates with the ECU through CAN's data circuits and is completely inaccessible to any scanning technology that uses RF or code grabbing.
The device has no LED indicators or radio signals so it is completely inaccessible to a car thief. It uses buttons on your car such as the steering wheel or dashboard to generate a unique number that needs to be entered to start the vehicle. You can alter this at any time to ensure that you are in complete control of the security of your vehicle. It also stops thieves from creating new key fobs, or replacing the ECU. This will stop them from taking away with your car.
Another way the device can stop theft is by detecting signals relay attacks. ghost immobiliser car are when thieves amplify the signal of your existing key fob to evade an immobiliser system. The Ghost system is able to detect this and disable the key fob to stop thieves from starting your vehicle.
You can also access a service-mode on your smartphone using the Ghost app. This lets you start your car with out your pin. This feature is ideal when you need to take your vehicle to a garage for servicing or valet parking. The app will also inform you when your car is moved away from its original location.
As you can see that investing in a ghost immobiliser has numerous advantages. It is easy to use, discreet and shields you from a variety of threats. It's also TASSA verified, which means that it has passed the stringent tests by an independent body. Choose a reputable, TASSA-verified supplier if you're considering installing an immobiliser from Ghost. This will ensure that the installer is certified and trained, and will work with the interface of your vehicle to ensure the highest level of protection.
There is no permanent damage to your car
The Ghost immobiliser is hidden in the dashboard or underneath the steering wheel. This means that thieves won't be able to even detect it. This is a huge advantage over traditional immobilisers that may be visible and easily bypassed by signal cloning or jamming devices. This is particularly beneficial for owners of luxury vehicles who wish to maintain their car's aesthetics and performance while providing a higher level of security.
The Ghost CAN Bus immobiliser also utilizes buttons on your vehicle's steering, centre console, or door panels to create an individual pin code. The pin code must be entered before you are able to drive. This pin code is similar to a credit card, and can be configured to accommodate up to 20 characters. This makes it harder for hackers to steal or clone the system and makes sure that only you are able to access the system.
When installing a ghost immobiliser it is crucial to employ a professional installation service. This will ensure that the device is installed correctly and won't cause damage to your vehicle. A professional can help diagnose problems with your vehicle and provide advice on how to fix them.
Before beginning the installation it is recommended that the battery be disconnected prior to beginning the installation. This will help prevent problems with the electrical system or accidental airbag deployment. ghost autowatch immobiliser is also essential to identify and label the CAN H and L wires since misidentifying these can lead to improper installation or system malfunctions. Once you have identified the power source and grounding point, it is important to protect these connections by using insulation tape or heat shrink tubing to protect them from short circuits. It is a good idea to also test the immobiliser once it is installed to make sure that its functionality is in line with what it was designed to do.
The Ghost Immobiliser is a powerful tool to fight vehicle theft, however it's not foolproof. Thieves are constantly devising new methods to evade security systems, so it is essential to incorporate it with other sophisticated security measures and remain vigilant. Following these tips will help you minimize the risk of your vehicle is stolen and provide you peace of mind no matter where you park.
TASSA verified
As thieves have become more sophisticated in recent years many car owners are taking extra precautions to secure their vehicles. Installing a ghost immobiliser is just one of the security measures car owners are taking to secure their vehicles. This is done to stop the theft of vehicles through key-cloning and hacking. But determined thieves will always find ways to circumvent these security devices.
Autowatch for instance has created a new generation of immobilisers that fight this. These new devices are TASSA verified meaning that they have been independently tested by experts from third parties to ensure that the device is incredibly reliable. This proves that the device is able to deter even the most experienced thieves.
The device itself is obtrusive, undetectable to a thief and connects directly with the buttons on your vehicle. You can create a unique PIN sequence that has to be entered by pressing the buttons on the steering wheel or centre console to begin or drive your vehicle. The system is completely silent and only works if the PIN code is entered correctly. The device does not emit radio frequencies and is therefore not able to be detected using conventional detection techniques, such as radar guns or scanners.
The Ghost II is also a Thatcham-approved device, which means it will be regarded by insurance companies as a layer of security that can lower your premium based on the insurer's requirements. This makes it the most reliable and sophisticated immobiliser available.
Having the TASSA verification also ensures that any company you hire to install your device is fully certified to fit the device, so you can rest easy knowing you are getting the best service and a high-quality installation. This is especially important as if you want the ghost to be recognised by your insurance company, because it could prove useful in the event that your car is ever stolen.